Jump to content

Recommended Posts

Posted

At last two week my game (BC3000AD v2.09) don't playable... Before this time all be just fine!

When I trying to start - I've passed through the intro movies, and after this step - I'll see a messge:

quote:


DOS/4GW Professional error (2001): exception 0Dh (general protection fault) at 2

0F:835D9111

TSF32: prev_tsf32 6B20

SS 217 DS 217 ES 217 FS 0 GS 8F

EAX FF EBX 83CBD0F0 ECX 0 EDX 83CB0200

ESI 83CB3110 EDI 838C5220 EBP 0 ESP 83CBD0EC

CS:IP 20F:835D9111 ID 0D COD 0 FLG 10282

CS= 20F, USE32, page granular, limit FFFFFFFF, base 0, acc CFFB

SS= 217, USE32, page granular, limit FFFFFFFF, base 0, acc CFF3

DS= 217, USE32, page granular, limit FFFFFFFF, base 0, acc CFF3

ES= 217, USE32, page granular, limit FFFFFFFF, base 0, acc CFF3

FS= 0, USE16, byte granular, limit 0, base 0, acc 0

GS= 8F, USE16, byte granular, limit FFFF, base 18E40, acc F3

CR0: unavailable

Crash address (unrelocated) = 1:000FA111


What's happend?

Maybe a reson is that fact - I've install a new Motherboard?

My system:

Pentium-S 100MHz 32RAM (MB with multicard for COMx ports - on MB itself COM2 - off-line)

PLEASE HELP SOMEBODY!

------------------

Commander Alex 'Hawk' Kich

GCV - Star Panther, Orion Starstation (CENTRIS)

Tsunami Battle Group

www.orion-hq.fsnet.co.uk

'Here cometh the storm!'

Posted

I your mouse working If not the game will not work the game look for the mouse to run.

We need to know everthing about what is in your system (hardware, what your system, Etc.)

------------------

Rear Admiral Finder1

Ivc Druid, Sygan Starstation (Sygan)

XO Balor Fleet

Assignment= Support

Posted

Alex, please post ALL of your known system specs.

Judging by what you did post, if you are running a Pentium 100mhz, that would be your problem. BC3K needs at least a Pentium 166mhz to run.

After you post the rest of your system specs, then we can see exactly where the problem lies.

------------------

Commander Greg Miller

GCV - Sark, Orion Starstation (CENTRIS)

Fleet XO, Wing Leader, Tsunami Battle Group

www.orion-hq.fsnet.co.uk

'Here cometh the storm!'

Posted

quote:


Pentium-S 100MHz 32RAM

Your processor doesn't meet the minimum system requirements.

Also (as was noted earlier in this thread), post all your system specs.

Posted

At first - thanks to all for reply!

AGAIN: I'm talking about BC3000AD v.2.09 - not BCM!

No, Pentium-S 100MHz 32RAM - is not a problem!

Game working just fine on this configuration before!!!

I say more! It was work at my old PC - 486/66 with 16 RAM 1M-video(by Win-95)! So 166MHz - not so STRONG needed! Thanks for Derek, his game more then unsensivity for this one! wink.gif All bigining after my previous MotherBoard's BIOS was burn... I find some old MotherBord with damaged COMx ports, I've installed my existing processor from burning MB to this new one. For using Mouse & modem (by COMx)I've dig multicard, which working fine - it was tested! - and connect on it modem, printer, FDD and mouse, with disable this items in BIOS's setup:

quote:


FDD on board -> Disabled

Serial port 1-> Disabled

Serial port 2-> Disabled

Parallel port-> Disabled


So, my mouse connected at COM port (9 pins) on this Multicard.

At the end full system's specs:

Pentium-S, 100 MHz

RAM 32 (EDO)

Video - S3Trio64V+ PCI, 1M

MB - "Intel PCISet, FW82371AB, L733TA33, SL23P, Intel© 96" - this wrote on one of the two biggest crystals on MB - at centre (near processor)

Muticard - for big (not PCI) slot - "GoldStar, Prima 2C, 9423" - wrote on crystal

System - Windows-98SE

HDD's contents not changed after all. Of course, system automatically updated after it find a new chips and new MB card, but nothing more! I'll checked - NO viruses present...

Yesterday I've try again to play - and game crashed at the middle of intro - not passed full second "intro-film" to its end!... Again system wrote "DOS/4GW Professional error (2001): ..." but another words below...

At another games all working fine: and mouse, and all things (right now! with new MB)... I'm stuck only at this game! frown.gif BUT its my lovely game! wink.gif

Besides, I'm reading RPG stories on the way from(to) home at subway train... Its make my "pain" much more without game's realization of this stories! (it's a joke! smile.gif ). But anyway... I hope you can assist me in my trouble.

"Mayday, mayday! This is GCV "StarPanther"... We've got a problems here! We have a FULL system's malfunction!...

Any Galcom's vessels, please respond! Mayday, Mayday!!!..."

------------------

Commander Alex 'Hawk' Kich

GCV - Star Panther, Orion fleet

Tsunami Battle Group

Orion HQ

'Here cometh the storm!'

[This message has been edited by Aleksey Kichigin (edited 02-15-2001).]

Posted

quote:

Video - S3Trio64V+ PCI, 1M

This is your problem.

1. Read the Troubleshooting FAQ.

2. Read the system requirements.

3. Run the sound setup.exe again.

4. Pray biggrin.gif

TTFN

------------------

Commander Gallion

GCV Graf Spee, Starbase Cerberus

Wing Leader - Wraith Fleet/Corsair Wing

"Run Silent, Run Deep"

Corsair Cove

Official Tester, Battlecruiser Series

Leader, Team 1

Posted

Do you think so?

But the game working on this S3 Trio card before!.. And working FINE!..

in Reqiurements wrote "...PCI card" - such as mine!

I'll try to reinstall the game and use "/v57" in comand line.

What do you think about multicard? Maybe a reason here? As Finder1 said - maybe game can't use mouse through the multicard?

I've read the FAQ... I've try all that things... I'll try it again... (And PRAY - as you said smile.gif )

Thanks!

cwm3.gif

------------------

Commander Alex 'Hawk' Kich

GCV - Star Panther

Orion fleet

Tsunami Battle Group

ORION HQ

'Here cometh the storm!'

[This message has been edited by Aleksey Kichigin (edited 02-15-2001).]

Posted

I'm reinstall game (v2.08) - not patched to v2.09 yet!

I'll try to use "/v1" and "/v57" keywords in bc3k.bat... I've got a message:

quote:


(right after start):

DOS/4GW Professional Protected Mode Run-time Version 2.00

Copyright © Tenberry Software, Inc. 1995

Heap is 4 meg

Max Buffering: 3072 K

Using "HMISET.CFG" for Sound/Music Configuration.

Setting Video: Brightness 100 Contrast 100 Tint 100 Color 100

Initializing Timer: Ok

No Sound Card Specified...

CD Setup: Block Size= 8192 bytes per read

after this one loading 'intro'...

Invalid Command: 6, 7798784, 0, 0

this one displayed after 'intro' corrupted, then continued:

BC3K Release A, Version 2.08/STD

Copyright © 3000AD 1992-99, All Rights Reserved

Tokens Read: 1186

Dpmi memory:

linear addr space 401140K

total physical 32180K

paging file size 368960K

Max un/locked 9568K, 9568K

Total unlocked/free 9568K, 9568K

Free addr space 9568K

Largest free block: 9797632 bytes

CDROM path: 'E:'

Resource files loaded ok

Detected Setup File OK

and after this one, I've got a message:

Failed to open objclass.dat


what is it?

Before (when it working fine) somewhere i can see a message (while game loading) where game wrote type of my video card... but here - nothing!!!

If I'll try to patch it to v2.09 - all corrupted! (wrote something like "...File not found...")

------------------

Commander Alex 'Hawk' Kich

GCV - Star Panther

Orion fleet

Tsunami Battle Group

ORION HQ

'Here cometh the storm!'

[This message has been edited by Aleksey Kichigin (edited 02-15-2001).]

Posted

1. Install v2.09 patch with the patch in the same directory as BC3K is installed in.

2. Run .bc3000adsetup.exe after applying v2.09 patch in a Dos window.

Good Luck biggrin.gif

TTFN

------------------

Commander Gallion

GCV Graf Spee, Starbase Cerberus

Wing Leader - Wraith Fleet/Corsair Wing

"Run Silent, Run Deep"

Corsair Cove

Official Tester, Battlecruiser Series

Leader, Team 1

[This message has been edited by Gallion (edited 02-15-2001).]

Posted

Hi Aleksei, good neighbour cwm1.gif

That last message of yours sounded like bad install, so I'll suggest that you (once more) go through the whole intallation process.

And remember to delete the the folder you installed it last time (don't forget to move your patches if they are in the same folder, I've done even that cwm9.gif ) and BCK3.INI file from the Windows folder. And remember that the patches MUST be in the intallation folder when you start patching. I wish you good luck!

------------------

Cmdr Jason Cloud

GCV Silver Lining, GENESIS (Moon)

26 Squadron Commander, 2nd squadron

Prime fleet, Gamma Wing

http://www.3000ad.com/images/gclogo.gif

Posted

This is as waste of time. Your system didn't meet with the game's minimum requirement before - and it doesn't now.

Anyone who wants to offer support for a system that does not meet with the min requirements of my games, should take it to email.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...