Jump to content
3000AD Forums
Sign in to follow this  
Elder

detonator 12.00whql dont work ,detonator 6.50 do work

Recommended Posts

ahhh my first post here.... I hope this is appropiate....I dl/ed the "lite" BCM demo ( only have ISDN) and just installed it... Ive been running the 12.00whql detonator drivers for a month or so ... seeming fine.... however with BCM when i launched the game the screen would go black for a few seonds then pop back to my desk top.... on a hunch i loaded up the "official" 6.50 drivers and the game now runs flawlessly... If any one else has the problem make sure your video drivers are the offical ones released from your vid card chipset manufacturer...... especially if your one of those people with and Nvidia card who loves to load the newest "beta" detonator drivers that seem to appear evey other week.....)

BTW i just learned of this game and this board. In brief all i can say is i cant believe i missed this one till now....Anyway i got questions which ill address in another post and after running some fourm searches.... oh wait i got to play the demo thru one more time........ see ya!

Elder

kk266

tbird 1.2 gig

512 crucial pc133

Elsa geforce 2 pro

onboard sound

[ 06-16-2001: Message edited by: mike ]

Share this post


Link to post
Share on other sites

Too bad the official drivers from Nvidia BSOD on me 25% of the time The drivers from Asus works fine. Anybody else owns a V7700 32mb PURE and have problems with the detonator drivers?

Share this post


Link to post
Share on other sites

quote:


on a hunch i loaded up the "official" 6.50 drivers and the game now runs flawlessly

Had you actually read the FAQ, you would have saved yourself the hunch and some time+aggravation.

Share this post


Link to post
Share on other sites
Guest CmdrDave

The 12 whql seems to work fine on my computer. I had trouble at first because I had not downloaded the latest drivers (which I found out by looking at the FAQ section). After downloading the 12 thingie with the detonator 3d (because I did not find the 6.5), the game worked perfectly. Well, very seldom it does freeze up but this probably me try to do something which is disabled like goto the Navcom.

I liked the game interface more than the original. I did notice that when I played the second instant action thing, that my Gamm crew looked like human crew. At the beginning they look like normal Gamm and then I receive a message and from that point on they are human and so I am.

While, I am sure you like hearing positive things, I know it is also to get constructive feedback on other aspects as well, since nothing is 100% perfect.

I suppose the only negative thing I could say about the game demo so far is the lack of interaction with other craft, i.e. I can not communicate with them. It would be nice in my opinion, to tell the Gamm to back off or be prepared for a fight (Sorry, I prefer Picard's approach to Kirk's. )or be able to verbally request docking instead of hitting ctrl-d. But I suppose the interaction with you crew serves to fill in the quiet void of space. I can see why it would not be necessary for multiplayer but some people do not play well with others.

Well, I look forward to seeing the next epsoide and how the ground system looks upclose.

Thanks.

Share this post


Link to post
Share on other sites

Ya i here ya SC... its just hard to find a balance between wanting to test the " latest and greatest" geforce drivers and being concerned with what drivers work with what particular game(s)/hardware im currently running.....)

CmdrDave- www.nvidia.com has the 6.50 drivers for the geforce... which are the most recent, official, and supported drivers from nvidia. Give them a try if your having any graphical issues.

[ 06-17-2001: Message edited by: mike ]

Share this post


Link to post
Share on other sites

quote:


I suppose the only negative thing I could say about the game demo so far is the lack of interaction with other craft, i.e. I can not communicate with them. It would be nice in my opinion, to tell the Gamm to back off or be prepared for a fight (Sorry, I prefer Picard's approach to Kirk's. )or be able to verbally request docking instead of hitting ctrl-d. But I suppose the interaction with you crew serves to fill in the quiet void of space. I can see why it would not be necessary for multiplayer but some people do not play well with others.

These were all part of my original design docs - but alas, there is only so much that I can put in the game, and still have room for the kitchen sink

....but, since you are new to the BC series, then you probably are not aware of my track record for putting in freebies in my patches. So, you never know what may show up in a later patch.

Share this post


Link to post
Share on other sites

Ok i have downloaded the Episode 1 high content demo (it took a little under 18 hours and i hope it is worth it ). I also got the patch and did everything it said to impliment it.

When ever I start the game the screen goes black but I still hear the sound as the game starts up. The only way for me to get out of the game is to alt tab out which turns off the game.

I have a geforce 3 and I am running the latest driver that is on the nvidia web site, v12.41. I went to there site and i am going to give the 6.50 driver a try.

[ 06-28-2001: Message edited by: Game_Ender ]

Share this post


Link to post
Share on other sites

The following nvidia Det 3 Drivers work fine in my experience:

12.01

12.40

12.41 WHQL

12.90

The 6.50 drivers will work but you will miss out on a lot of goodies

quote:

...Ok i have downloaded the Episode 1

Should've spent time downloading Episode 2.

Enjoy

TTFN

[ 06-28-2001: Message edited by: Gallion ]

Share this post


Link to post
Share on other sites

quote:


Should've spent time downloading Episode 2

Great, now he's going to sink into a state of depression.

Share this post


Link to post
Share on other sites

I already am, this also happens with Homeworld and Homeworld Cataclysm (but only since i got my Geforce 3).

The 6.50 driver won't install, it can't find a "Nvidia graphics chipset". Its also called "TNTW9.EXE" so it might be to old for a geforce 3? I don't what it is , the sound plays just like the game was starting up like normal but nothing appears on the screen.

Is there anything else to do, to screw up before i even start a scenario it must be something basic (or really complicated )

P.S. - I was planing on getting Episode 2 after i got Episode 1 working.

Edit- I forgot to mention i got a new mother board and CPU along with my Geforce 3, so they could be the problem. The mother board was by the K7VZA Revision 3.0 by ECS (With 1.3Ghz tbird).

Also this setup plays other 3D games just fine. The "other" includes Emperor: Battle for Dune and Deus Ex (it uses the Unreal Engine).

[ 06-28-2001: Message edited by: Game_Ender ]

Share this post


Link to post
Share on other sites

Here is the debug log file from one of the times the game didn't work right. To be more exact every time a start up the game the screen goes into stanby/shutdown mode (the mode it goes in when the i turn off the computer but not the monitor).

Loading objects.dat

Loading connect.dat

randomising

Misc allocations

Setup sin() table

iam_init()

alloc mtds

alliance_init()

WindowResize()

Client :0,0,634,455

Parent :0,0,640,480

palette_load()

Initialise Commlink

Initialise pte

sound_init()

keyboard_open()

Initialise debris

Initialise stars

Initialise planet

Planet points 424 427)

Planet triangles 800

control_open()

init() completed

Here is the results from a program that gets details on computer specs. I am doing this in hope that someone will see what is wrong. If i don't find something wrong i will just reformat my hard drive , reinstall windows , and then try to find all the right drivers .

----EASy System Summary--------------------------------------

Video Card : NVIDIA GeForce3

Video Driver : nvdisp.drv

Driver Version : 4.13.01.1200

Sound Card : Creative SB Live!

Sound Driver : emu10k1.vxd

Driver Version : 4.06.00.0703

DirectX : DirectX 8

Operating System Windows 98 A 4.10.2222

----EASy System Output---------------------------------------

Computer Name : Joe

BIOS Info

Name : Award

Version : Award Modular BIOS v4.51PG

PNP : Plug and Play BIOS

Manufacturer : (Standard system devices)

CPU Info

CPU Count : 1

CPU Type : 1338 MHz AuthenticAMD Thunderbird

6 4 2

RAM : 510 MB Total

408 MB Free

Virtual RAM : 1537 MB Total

1457 MB Free

Operating System : Windows 98 A 4.10.2222

Default Browser : Internet Explorer

Version : 5.50.4134.600

Temp Directory : C:WINDOWSTEMP

Size : 193 MB

------------------------------------------------------------

----Display Info--------------------------------------------

Number of Displays : 1

Current Mode (Primary) : 1024x768 32

Refresh Rate (Primary) : Optimal refresh rate

Primary display device

Description : NVIDIA GeForce3

Manufacturer : NVIDIA

Video Memory : 64 MB

Main Driver : nvdisp.drv

Version : 4.13.01.1200

Provider : NVIDIA

Supported Display Modes

| 16 | 256 | 16 bits| 24 bits| 32 bits

---------------------------------------------------

640 x 480| * | * | * | | *

800 x 600| | * | * | | *

1024x 768| | * | * | | *

1152x 864| | * | * | | *

1280x1024| | * | * | | *

1600x1200| | * | * | | *

------------------------------------------------------------

----Sound, Video and Game Controllers-----------------------

Description : Creative SB Live!

Manufacturer : Creative

Main Driver : emu10k1.vxd

Version : 4.06.00.0703

Provider : Creative

Description : Logitech USB Microphone

Manufacturer : Logitech

Main Driver : LVSound2.sys

Version :

Provider : Logitech

Description : Microsoft Kernel System Renderer

Manufacturer : Microsoft

Main Driver :

Version :

Provider : Microsoft

Description : 2-axis, 2-button joystick

Driver : msjstick.drv

Version : 4.08.00.0400

Attached : Yes

------------------------------------------------------------

----Direct X------------------------------------------------

DirectX Info

Version : DirectX 8

DirectDraw Info

Version : 4.08.00.0400

Certified : Not certified

DirectSound Info

Version : 4.08.00.0400

Certified : Not certified

DirectPlay Info

Version : 4.03.00.1096

DirectInput Info

Version : 4.08.00.0400

------------------------------------------------------------

----Drive Information---------------------------------------

----CDRom Info----------------------------------------------

Cache size : 1238 KB

Access Pattern : Quad-speed or higher

Drive Letter A

Volume Name :

Type : Floppy

File System : FAT

Total Space : 1.39 MB

Free Space : 891.50 KB

Drive Letter C

Volume Name :

Type : Fixed

File System : FAT32

Total Space : 5.96 GB

Free Space : 3.73 GB

Drive Letter D

Volume Name :

Type : Fixed

File System : FAT32

Total Space : 9.76 GB

Free Space : 570.89 MB

Drive Letter E

Volume Name :

Type : Fixed

File System : FAT32

Total Space : 9.75 GB

Free Space : 4.56 GB

Drive Letter F

Volume Name : EMPEROR3

Type : CDRom

File System : CDFS

Total Space : 592.63 MB

Free Space : 0.00 KB

Sec/MB : Test not performed

Detected Speed : Test not performed

------------------------------------------------------------

----Monitor Information-------------------------------------

Primary monitor

Description : ViewSonic PF790

Manufacturer : ViewSonic Corporation

Max. Resolution : 1600x1200

------------------------------------------------------------

----Network Information-------------------------------------

Description : Dial-Up Adapter

Manufacturer : Microsoft

Driver : pppmac.vxd

Provider : Microsoft

Bound Protocols

TCP/IP

IP Address: Obtained from provider

IP Mask: Obtained from provider

------------------------------------------------------------

----Input Device Information--------------------------------

Mouse Information

Description : Cordless8 (PS/2)

Type : PS2

Keyboard Information

Description : IBM enhanced (101- or 102-key)

------------------------------------------------------------

----Modem Information---------------------------------------

Description : Modem Blaster USB DE5670

Driver : Modem Blaster USB DE5670

Provider : 3-30-1999

------------------------------------------------------------

----Glide/OpenGL Information--------------------------------

Glide Info

Glide2 Version :

Glide3 Version :

OpenGL Info

Version : 4.0

------------------------------------------------------------

----Task List-----------------------------------------------

msgsrv32.exe

spool32.exe

mprexe.exe

mstask.exe

lexbces.exe

rpcss.exe

mmtask.tsk

ddhelp.exe

taskmon.exe

Systray

wmiexe.exe

rnaapp.exe

tapisrv.exe

iexplore.exe

pstores.exe

Explorer

ez.exe

------------------------------------------------------------

----Autoexec.bat--------------------------------------------

SET BLASTER=A240 I2 D0 H7 P330 T6

SET CTSYN=C:WINDOWS

C:PROGRA~1CREATIVESBLIVEDOSDRVSBEINIT.COM

@SET CLASSPATH=C:PROGRA~1PHOTOD~1.0ADOBEC~1;D:Program FilesHEATnavbar;%CLASSPATH%

------------------------------------------------------------

----Config.sys----------------------------------------------

DEVICE=C:WINDOWSHIMEM.SYS

DEVICE=C:WINDOWSEMM386.EXE

------------------------------------------------------------

X_CASE_START

X_CASE_DESCRIPTION:

X_CONTACT_FIRST_NAME:

X_CONTACT_LAST_NAME:

X_GAME:

X_SERIAL_KEY:

X_OPERATING_SYSTEM: Windows 98 A , Version 4.10, Build 2222

X_PROCESSOR: Thunderbird

X_SPEED: 1338 MHz

X_MMX: No

X_RAM: 510 MB

X_MANUFACTURER:

X_PRODUCT_ID:

X_VIDEO_CARD: NVIDIA GeForce3

X_DISPLAY_DRIVER: 4.13.01.1200

X_DISPLAY_DIRECTX: Not Certified, Hardware Support

X_DISPLAY_MEMORY: 7 MB

X_AUDIO_CERTIFIED: Not Certified

X_AUDIO_DRIVERS: emu10k1.vxd 4.06.00.0703

X_MODEM: Modem Blaster USB DE5670

X_V_MANUFACTURER: NVIDIA

X_A_MANUFACTURER: Creative

X_CASE_END

Share this post


Link to post
Share on other sites
Guest Gaidal

Hey, have you tried disabling the "Adjust Z-buffer depth if rendering unequal"? I know that was an issue with the 6.50 drivers, but it *seems* to work for me with the 12.x ones.

Also, if you have a VIA chipset board, download and install the latest version of the 4-in-one drivers. One other thing, try uninstalling the nVidia drivers before reinstalling them next time. Sometimes some leftover driver thingies (yeah real technical *g*) get stuck on there, especially if you upgraded from another nVidia card.

Finally, you might have to format and reinstall. Hope you got a CD burner, it really does make things a little better.

Share this post


Link to post
Share on other sites

I have been having some odd graphic problems running the 12.90 drivers with the ep2 demo. Firstly the 12.90 drivers work with all my games and seem to be just as fast or even a tad faster (and have better visuals)than the previous 7.52 drivers I was running. Now I am currently playing "Emperor battle for dune","Startopia",and "UT"with "infiltration". These games seem to run much better with the 12.90 drivers due to dx8 support as EBfD and Startopia are dx8 games like unto the BCM demo2. The BCM demo2 runs great on these drivers and seems so far to be quite stable on them. Unfortunatly there is one little problem I am having with them. The problem ONLY occures in the e2demo. Basically what is happening is that the planetary aspect of the game is rendering ludicrus levels of fog. The "fog" (don't know if thats what it really is or not)is the same color of the sky..such as a mars like planet would be 5ft of visibility in redish fog..or a moon(satini) of a gas planet would be black fog as there is no atmosphere there. I can do every thing the demo offers except the plantary visiblity makes flying planet side impossible. I can see the shadowy forms of buildings and vehicles when I am in a certain distance but they have no visble color other than that of the fog ..just darker. TTDs are visible and readable and targets in the cvd are normal..just as they are in the space side of the game. Now what I am hoping here is that someone might have an idea of what needs to be adjusted to make this "Fog" from hell go away. Oddly this did not happen on my 7.52 drivers ( YES i know they not dx8 compliant but I was curious how far they would work..oddly they worked, just a bit unstable is all but everything was functional). I would like to hold onto these drivers(12.90) if possible but if not then could someone tell me which driver set from 10.80 ,12.00,12.41,12.60, work best as an alternative? Thanks, your time is much appreciated.

PS: my apature is set to 64mb and all the other little bios things that need to be done have been done since the the instalation of my 7.52 drivers.

My machine is a

PII 350

leadtec winfast geforce2 mx 32mb

128mb ram

win98

dx8.0

Share this post


Link to post
Share on other sites

Only drivers officially released by the manufacturers, are supported. In which case, that would be the 12.41 WHQL drivers.

Share this post


Link to post
Share on other sites

ack this post wont die!.....Im my opinion the multitude of vid card/driver combos out there creates a nightmare for game developers trying to create a solid game that will run on every ones rigs ..... So if you want to try vid cards or drivers not listed as "offical" by the game development team.....cool! But use at your own risk! That said anyone who owns an Nvidia based vid card is presented with "new" drivers ever other day it seems like. Many of us like to test out these drivers as see how they perform with different games/benchmarks.... All good....... But i think many people switch Video card drivers so often and dont uninstall/install properly that they have "junk" left in there registry thats affecting the performance of there video card when they do install the correct drivers.. Im to lazy to type out a step by step discription of how to uninstall/install vid drivers but I found this nice little utility over @ www.guru3d.com called Detonator Destroyer which explains how to use it and then install what ever drivers you want to install..Heres a link :

web page

P.s.

Im a very patient man.......but this waiting for BCM to go gold is killing me! arg!

ARG!

Share this post


Link to post
Share on other sites

Thanks for your input into the matter, it is appreciated. Just fyi I did follow the guru3d method of install and uninstall for nvidia drivers. Switching to another driver set is really no big deal..I was just wondering if the issue could be remedied through settings somewhere. I think I have heard of this kind of problem with people with other products and there was some solution to it. However I will just explore the rest of the 12.41 and 12.60 to see which works out best for me. The main reason I was using the 12.90 driver was because I read about some fixes that the SC was working on that might be solved by the 12.90 canidate (hehe I do read ALL the vfc..old habit from the first game..wish there was a way to do a word search in it though. personaly I wish all programing teams would create vfc's as I do QA for a living, and well sometimes my job is harder than it needs to be). Also loaded them up cause most people around the web are saying they are pretty damn good drivers in comparison to 12.41, guess i'll go be the judge of that.

My apologies for being too wordy..I am a wordy kind of guy.

Share this post


Link to post
Share on other sites

i have a TNT2 with 12.41 det3 drivers and the only probs I had was not installing the drivers properly as per the specific instructions on installing the card drivers. Had no probs with episode 1 after turning of the z buffer, and absolutely none with episode 2. But maybe its because i read the FAQ.

The specs well Duron 800 Gigabyte 7Zm Mainboard 128 mg Ram TNT2 32 mg ram 98 SE and only 2.1 gb HDD

And it works damn fine

[ 07-17-2001: Message edited by: Falcon ]

Share this post


Link to post
Share on other sites

quote:

Originally posted by Supreme Cmdr:

Only drivers officially released by the manufacturers, are supported. In which case, that would be the 12.41 WHQL drivers.

Um, I have those drivers installed and I cant get Demo Ep 1 to work at all. It just flashes down to 640x480 then flashes back to 1600x1200 (desktop res). Yes, "adjust z buffer depth to rendering depth if unequal" is ticked in my display settings. So, what gives?

Share this post


Link to post
Share on other sites

quote:


Yes, "adjust z buffer depth to rendering depth if unequal" is ticked in my display settings. So, what gives?

Read the FAQ again. S_L_O_W_L_Y this time. OK?

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×