Guest Shingen Posted May 10, 2004 Report Posted May 10, 2004 You might want to go into the game and check something. In logisix > CC > Deck-3 > N/reactor/upgrade - underneath Trellis is listed I/furs ( instead of KARANIAN MK4 ) In Logistix > CC > Deck-4 > Shield/upgrade - underneath Linear S/IV is I/computers ( instead of TA Shield )
Supreme Cmdr Posted May 10, 2004 Report Posted May 10, 2004 Is this with a new game? And I don't even understand the steps you are showing above. The decks only show what you have installed. I have checked it and everything looks perfectly fine in the decks and in Tradcom.
Guest Shingen Posted May 10, 2004 Report Posted May 10, 2004 New game with 2.00.00 patch When I had the standard componants installed (Lattis/NB, Starcry/S, Spectrum/A), then bought upgrade componants, put them into the main CC carbobay... go into Logistix - CC - deck - reactor/upgrade - underneath Trellis is listed I/furs (should be Karanian MK4) shields/upgrade - underneath Linear S/IV is listed I/computers ( should be TA shield ) If you don't have a componant, the upgrade tab won't activate, so you won't see the upgrade list. can take a screenie and email it.
Supreme Cmdr Posted May 10, 2004 Report Posted May 10, 2004 Reproduce it using the 2.00.02 RC1 patch and send me the saved game files to [email protected] and I will look at it. Also, look in DATAITEMS.INI. The first artifact should be item number 418 and the last would be 427. If thats not what you have, then your version is not up to date.
Guest Shingen Posted May 10, 2004 Report Posted May 10, 2004 Sorry, my bad. I was and am in fact using the current 2.00.02 RC1 patch. items.ini confirmed: 418 = H.S.D. thru 427 = PHASED ARRAY IOD will upload savegame
Supreme Cmdr Posted May 10, 2004 Report Posted May 10, 2004 What craft are you using? The problem might be in the DATAASSETS.INI file. When I revised the ITEMS.INI file, maybe I didn't update the ASSETS.INI file since some item numbers may have changed. e.g. look in the RUPGRADE, EUPGRADE, SUPGRADE, AUPGRADE entries and match those numbers to the entries in the DATAITEMS.INI. If you see entries which don't match, thats the problem. [ 05-10-2004, 12:28 PM: Message edited by: Supreme Cmdr ]
Guest Shingen Posted May 10, 2004 Report Posted May 10, 2004 File sent to [email protected] along with screenies. Flying standard BC MK3. I'll look through the entries, but I can't edit the item.ini anyway. Thanks EDIT found it in assets.ini for BC MK3: RUPGRADE{171,185,170,242,144,251,408} 408=I/furs EUPGRADE{232,133,138,194,193} SUPGRADE{231,176,177,178,404}404=I/computers AUPGRADE{244,245,246,247} It looks like it's the same for every heavy carrier/carrier asset, but I can edit the files?? [ 05-10-2004, 11:25 AM: Message edited by: Shingen ]
Supreme Cmdr Posted May 10, 2004 Report Posted May 10, 2004 There you go. I thought so. OK, will fix right now and uploaded a fixed INI file to the reg page. Gimme a few minutes to check and double check. No, you can't edit the files because of the MD5 encryption check at the top. And don't worry, the revised INI file won't affect saved games. At least I don't think so. [ 05-10-2004, 12:26 PM: Message edited by: Supreme Cmdr ]
Supreme Cmdr Posted May 10, 2004 Report Posted May 10, 2004 OK, you're all set. The revised file is now on the reg page. Just download and unzip into your game folder. Let me know if your save game shows the correct info or not. This file will be included in the upcoming 2.00.03 patch, due out later tonite.
Guest Shingen Posted May 10, 2004 Report Posted May 10, 2004 Most excellent! Savegame works fine, upgrades are now fixed! Thanks again!
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now