netshaman

Hi, duncan, you're right, the CTD with intruders is a driver issue: with 27.30 the game CTD, with the 27.20 and 27.50, 27.51 it runs fine. Have you noticed while in FPM the increased fire rate ?

Hi, the save game was sent, at the right address now. Cheers.

quote:Originally posted by Supreme Cmdr: Dunno where you sent it, but I don't have it.I sent it to the tech support , but it seems to be the wrong adress: ireceived an automatic message. What is the "real" adress to send it to ? P.S: In the save folder there is a file with an *.sgd extension and a another with a *.sav extension: must i send these two files ? Sorry it is the first time, i don't know what is the file you are interested in. Cheers. Go read the forum archives [ 02-28-2002, 19:23: Message edited by: Supreme Cmdr ]

quote:Originally posted by Supreme Cmdr: I need a saved game. Send it in. I had intruders in a game yesterday and monitored them in PerScan just fine.Hi SC, i had just sent to you the save game. Finally. I had verified with v1.0 of BCM, to see if this was caused by my system, but not, it seeems to be a v1.0.0.6 issue. Cheers.

Hi SC, with this new patch there are two little things that had appeared: a CTD if there are intruders onboard when you switch to perscan. And if you are in FP mode the fire rate of the weapons is increased dramatically: you can empty a clip in a second, its like the same problem xerxior has described. I had not tried this with the 1.0.0.5 SP1 patch, only 1.0.0.6, and deinstalled, reinstalled BCM, and tried again, same result. Cheers.

Hi SC, i has found one: if i dock at a naval base in earth for example, and choose the tradcom in the menu it results with a CTD. I tried it 2 times and it is the same result. Cheers.

I had discovered a new and very annoying bug, it is reproductible and if you want i can mail you a save game. For something to be annoying, it has to be something you do often. This (a) doesn't remotely look like a bug ( is not something you would do often, so it can't be annoying. Until I see proof that warrants my attention, this is a non issue to me. For one, you might like to actually revise the post so that it is clear and coherent. My gibberish to English translator is on the fritz. Well, to enable this bug you must: - Enter in a planet, Earth for example, i had not tried another one, with your CC - Send a marine to one of your shuttles -Launch the shuttle, and give it the order to tow your ship -Send the commander to another shuttle. -Shut down the Reactor core -While the first shuttle is towing your CC give it the order to halt when the solar panel indicator shows there is some energy available -Now go in logistix and enable the Launch Control. -Try to launch the shuttle with the commander inside Result: the shuttle refuses to be launched. If you are in space the shuttle is launched normally, but on a planet nothing. And if you shut down the reactor in trying to land in the water, then the shuttle was launched, but the main view cannot switch to the shuttle view, it stayson the bridge view, and if you point the cursor on the shuttle icon number it says that the crew in this shuttle is the commander but there is no order available so you cannot control it. It was just shown like a shuttle on board but its color is grey. And on the radar this shuttle is not visible. If you go the tactical computer it shows that the shuttle is launched and the commander onboard. I hope this can help you to make a bug free game, SC. Cheers. [ 02-12-2002, 15:54: Message edited by: Supreme Cmdr ]

Ok it works ! Thank you

Ok thx , i will try.

I' am registered man but the system profile don't seem to be activated !!! How can i reach it, it is not in my profile !!

He has decloaked or i suppose he was cloaked because i didn't saw him before. There is another case where the IA goes nuts, it's when i try to use CALS and the ship always crash on the ground, or in the water, in this case i was trying another trick:launch a shuttle go in a second shuttle wwhen the cc is under water, wait the first tow the cc, launch the second shuttle with the AE inside, but (and here is a bug) the AE view stay in the cc and not in the shuttle.

Well, was taking a tour just for fun in the saturn zone when i saw a ter/mil station, and i said to myself :"well let's attack these just for the fun !" So i tell my crew to arm missiles and to attack, but there was no reaction from the station. In continuation without defense the station was destroyed, and i saw an aestrom in the horizon: cool an ennemy i thought let's go !!! I told the IA to attack and she...just go nuts !!! Icredible, in the middle of the path between the aestrom and the BC there was the station i said before, but the IA doesn't seems to turn round the station, she just keep on ramming into the station like a blind ! So i disabled the IA and take the control of the BC manually to attack the aestrom, but i was destroyed by a second vessel which was cloaked just behind me, the first was just here like a lure to invoid me in error, good tactic ! [ 02-10-2002, 09:10: Message edited by: Supreme Cmdr ]

Thanks all for your help

The original topic you posted, is EXACTLY the reason nobody but mods and admins are allowed to create new topics in the tech support section. So please tell me why i can't post in the support forum ? It tells me i 'm not allowed to post here ! It was for an issue of BCM... Just for saying some sattellites of jupiter or saturn being totally transparent viewed by a certain angle while in tacops or in tactical view (F9-F10). Please don't flame me !!! [ 12-20-2001: Message edited by: Supreme Cmdr ]

hi, where did you got this bc3kwin patch ? It' s not on the bc3000 web site. Cheers.

SC you're the best THANK YOU !!!!!!

YYEEEEEAAAHHHHHH!!!! I just can't wait its shipping to home

LOL.

Thanks, folks. Cheers.

Do anyone know if the 3D cockpits will return in BCM ? Because, there is nothing about this in all the screenshots i had seen. Sorry to bother you wich such a question... Cheers.

Thanks, i will try this

...where i can find the bc3k cd, because it is not for sale anywhere now ? And i stil can't wait anymore BCM ! Two months is toooooooooo loooonnnnggggg ! Cheers.