Milamber Posted April 15, 2006 Report Posted April 15, 2006 Single Player UCAWA.exe = created: Tuesday, Oct 18 2005 1:08 a.m. modified: Thursday, April 13 2006 1:14 am UCAWAMP: = same I followed the directions at the top of this page exactly. I have not attempted the D2D again. I have noticed that no matter what I do, the updater does not download any version of a patch other than 1.00.14. When I installed .08 from the original download, the updater downloaded .14. If I roll the ini file to .12, it does not download a .13 but goes directly to .14 That top post seems to indicate that this would be the case if the version was higher than 1.00.07 so I don't see a way to grab the .13 patch and, indeed, I've never seen that patch come through when I've run the updater. My system information page gives me the following statement: "Processor x86 Family 6 Model 7 Stepping 1 AuthenticAMD ~1302 Mhz" DXDIAG says this: "Processor: AMD Duron Processor, MMX, 3DNow, ~1.3GHz" If the second one is correct, I'll be pleased to update it.
TroKhon Posted April 15, 2006 Report Posted April 15, 2006 Hi! I just downloaded from D2D and patched successfully. I get the same FP error as Milamber when I start a fresh new game but I use no AMD proc. Instead an Intel PentiumĀ® D 3.0GHZ. File version of UCAWA modified Apr 13 2006 1:14 AM Thanks in advance Martin
Ben Zwycky Posted April 15, 2006 Report Posted April 15, 2006 A Duron 1.3 Ghz is way below the minimum system requirements for the game (the minimum is a Pentium 4 2.0Ghz or equivalent AMD processor (i.e. Athlon XP 2000+ at the very least) UCAWA product info my UCAWA was created 11 August 2005, 07:01:00 and modified 13 April 2006, 08:13:59 my UCAWAMP was created 11 August 2005, 07:01:00 and modified 13 April 2006, 08:12:01 so something went wrong with your patching process.
Milamber Posted April 15, 2006 Report Posted April 15, 2006 Oy, then I have wasted everyone's time due to my overlooking the obvious. My apologies. I shall now retire to my side of the keyboard with my thanks for your patience...
Supreme Cmdr Posted April 15, 2006 Author Report Posted April 15, 2006 quote:Originally posted by TroKhon: Hi! I just downloaded from D2D and patched successfully. I get the same FP error as Milamber when I start a fresh new game but I use no AMD proc. Instead an Intel PentiumĀ® D 3.0GHZ. File version of UCAWA modified Apr 13 2006 1:14 AM Thanks in advance Martin Then something is wrong on your end because this issue ONLY affects AMD processors. And please fix your sig and also enter the version numbers for your drivers, or your profile - and posts - will be deleted.
Matchoo Posted April 15, 2006 Report Posted April 15, 2006 Both singleplayer and multiplayer are running great for me now. Thanks.
Supreme Cmdr Posted April 15, 2006 Author Report Posted April 15, 2006 quote:Originally posted by Matchoo: Both singleplayer and multiplayer are running great for me now. Thanks. Please complete your profile.
Matchoo Posted April 16, 2006 Report Posted April 16, 2006 quote:Originally posted by Supreme Cmdr: quote:Originally posted by Matchoo: Both singleplayer and multiplayer are running great for me now. Thanks. Please complete your profile. Done
TroKhon Posted April 16, 2006 Report Posted April 16, 2006 I hope my Sig fits right in now. Any suggestions what i can do now? Shall I reinstall the whole game from scratch I don't know if I can do this without any license trouble. Thanks Martin
TroKhon Posted April 16, 2006 Report Posted April 16, 2006 Hi again. What I tried now was the following. I changed version info in settings.ini back to version=1.00.09 and patched with 1.10 D2D.exe Game runs fine. I tried up to 1.13 no problem after patching to 1.14 I feel sorry but i get Runtime Error! R6002 - floating point not loaded I checked twice!
Supreme Cmdr Posted April 16, 2006 Author Report Posted April 16, 2006 First of all, this [compiler] bug does not affect Intel CPUs. So I have no idea what you're doing or why you're getting that. I'm stumped. HOW are you patching this? Are you using the game Updater or downloading the patch from the D2D patch page? If you are downloading it directly from the D2D patches page. Don't. It has not yet been updated by them. Also.... What is the date/time/size stamp of the ucAWA_1.00.14_D2D.exe file that is downloaded (by the game Updater) and copied to your game folder prior to patching? After the patch is completed, go to the game folder and locate this file. What is the date/time/size stamp of the UCAWA.EXE and UCAWAMP.EXE files created by the patch? btw You can open Explorer and right-click on the file and go into properties to get this info. Anyway, until we figure out wtf is going on, roll back to 1.00.13. Just set your INI to 1.00.12 and run the Updater.
TroKhon Posted April 16, 2006 Report Posted April 16, 2006 Hi! Thanks fāār your fast and helpfull response (as allways ) I have been allways trying the Game Updater! My files show the following dates UCAWA.EXE : 13. April 2006, 01:14:00 UCAWAMP.EXE : 13. April 2006, 01:14:00 ucAWA_1.00.14_D2D.exe : created 16. April 2006, 11:25:45 changed: 16. April 2006, 11:27:19 Rolled back to 1.00.13 which works fine for me! Thanks Martin PS. Tell me if anything else can be done by me to help you figure this out.
Supreme Cmdr Posted April 16, 2006 Author Report Posted April 16, 2006 I asked for the sizes of those two EXE files. Also, please delete that ucAWA_1.00.14_D2D.exe file and run the Updater again to go to 1.00.14. Then run the game again and get back to me please.
TroKhon Posted April 16, 2006 Report Posted April 16, 2006 Hi! Sorry for the missing sizes UCAWA.EXE : 13. April 2006, 01:14:00 2,52 MB (2.648.065 Bytes) UCAWAMP.EXE : 13. April 2006, 01:14:00 2,72 MB (2.859.521 Bytes) ucAWA_1.00.14_D2D.exe : created 16. April 2006, 20:04:26 changes 16. April 2006, 20:05:57 size 19,6 MB (20.567.318 Bytes) did a delete of the ucAWA_1.00.14.D2D.exe and an update via updater. Unfortunately problem persists. Thanks Martin
Supreme Cmdr Posted April 16, 2006 Author Report Posted April 16, 2006 OK, this is weird on so many levels, its not even funny. Please rollback to 1.00.13 for now. Tomorrow I'll look into this some more and try to figure out wtf is going on here. btw, do you get this error in both single and multiplayer? Also, at one point do you get the error?
TroKhon Posted April 17, 2006 Report Posted April 17, 2006 Hi! The error is with both SP and MP Last message I see on the right bottom is Loading Completed. Standby. Martin
Supreme Cmdr Posted April 17, 2006 Author Report Posted April 17, 2006 btw, you are certain that you have an Intel CPU or did you upgrade and forgot to update your profile?
TroKhon Posted April 17, 2006 Report Posted April 17, 2006 absolutely certain Its an Intel Dual Core bought this one extra for its power
Supreme Cmdr Posted April 18, 2006 Author Report Posted April 18, 2006 quote:Originally posted by Milamber: Oy, then I have wasted everyone's time due to my overlooking the obvious. My apologies. I shall now retire to my side of the keyboard with my thanks for your patience... Well, you can always roll back to 1.00.13 if that works for you.
Supreme Cmdr Posted April 18, 2006 Author Report Posted April 18, 2006 quote:Originally posted by TroKhon: absolutely certain Its an Intel Dual Core bought this one extra for its power OK, lets go to plan C Rename your [1.00.13] UCAWA.EXE and UCAWAMP.EXE files to .BAKDownload this D2D file and extract into your game folderRun both the sp & mp versions of the game and let me know if either works or not. If this version still does not work, just revert back to 1.00.13 by deleting the files and restoring the backup versions in step #1 Also, I'd like anyone with the D2D version to try this as well please.
TroKhon Posted April 18, 2006 Report Posted April 18, 2006 Hi! I did exactly what you wrote above. Unfortunately both exe's do not start the game at all. I have absolutely no idea why. There is also no message at all. Mouse shows for about a quarter of a second a busy cursor and that is all thats happening. File information: ucAWA.exe created 18. April 2006, 18:35:55 changed 18. April 2006, 11:33:52 2,52 MB (2.648.577 Bytes) and ucAWAmp.exe created 18. April 2006, 18:43:40 changed 18. April 2006, 11:36:42 2,72 MB (2.860.033 Bytes) Martin
Supreme Cmdr Posted April 18, 2006 Author Report Posted April 18, 2006 Try installing the DirectX April 2006 Update [ 04-22-2006, 07:21 AM: Message edited by: Supreme Cmdr ]
TroKhon Posted April 18, 2006 Report Posted April 18, 2006 Hi! Due to the directX upgrade the application starts now, but before the main menu appears directly after the intro animation the application stops with the following error. Runtime error! The application has requested the Runtime to terminate it in an unusual way. this happens for the SP and MP version. Martin
Supreme Cmdr Posted April 18, 2006 Author Report Posted April 18, 2006 OK, back to the drawing board. I'll get back to you tomorrow with another test. This is just the usual bullshit from Microsoft. In the meantime, Matchoo, can you try this version as well please and let me know your results?
Matchoo Posted April 19, 2006 Report Posted April 19, 2006 I got my verson on CD from BMT Micro. Would you still like me to try it?
Recommended Posts